13 FILTER INSTALLATION AND USER GUIDE BARRIE • ONTARIO • CANADA 705.733.8900 WWW.EXCALIBURWATER.COM Exit Filter System Setup Step 8S: - Select “oFF” for the fourth/Rinse cycle. Press NEXT to go to step 9S or Press REGEN to return to previous step. Step 9S: - Select “oFF” for the Fill cycle. Press NEXT to go to step 10S or Press REGEN to return to previous step. Step 10S: - Keep the default capacity of “24,000”. Press NEXT to go to step 11S. Step 11S: - Set the volume regeneration trigger “off” using ▲ or ▼. Press NEXT to go to step 12S or Press REGEN to Step 13S: - Set “11:00” min so that relay must energize 8 minutes after the starting of regeneration. Press NEXT to go to step 14S. Step 12S: - Set relay operation “Set Time on” using ▲ or ▼ buttons. Press NEXT to go to step 13S.Press REGEN to return to previous step. Step 14S: - Set “58:00” min so that relay must stay activate for 58 minutes and deactivates after expiring this time duration. Press NEXT to save and exit Filter system setup.
RkJQdWJsaXNoZXIy NTc4ODc=