NOTE: THIS STEP FOR REMOTE LOCATIONS ONLY STEP SEVEN – INSTALL RO SYSTEM & DRAIN 1 Determine if tubing is long enough to reach drain. If yes, insert restrictor in end of tubing and insert this end into drain port on membrane. If no, replace with tubing of adequate length and insert restrictor into end of tubing. Insert this end of tubing into drain port on membrane. 2 Cut enough 1/4”white tubing to drain port. 3/8” 3/8” 2” Minimum Restrictor 1/4”White Tube to Drain Point 8
RkJQdWJsaXNoZXIy NTc4ODc=