Excalibur Superior Reverse Osmosis System Manual

12 REVERSE OSMOSIS INSTALLATION AND USER GUIDE BARRIE ● ONTARIO ● CANADA 705.733.8900 WWW.EXCALIBURWATER.COM START UP INSTRUCTIONS • Sanitize the system with good quality unscented liquid chlorine household bleach and follow the sanitizing instruction given in maintenance section of this manual. • Slowly open the feed water valve counterclockwise and inspect plumbing for leaks. • Fully open the holding tank valve. • Let the system to fill holding tank and when system automatically shuts off, then open the faucet to drain all water stored in holding tank. Repeat this step 2 more times. • Do not use the water of first three full holding tanks. CAUTION: The Reverse Osmosis Membrane is shipped with a preservative in it (0.5% sodium metabisulfite). This will be rinsed out with the first water produced. Allow the Holding Tank to fill (overnight) and discard the first three full tanks of production. When the Faucet is first opened, expect air and carbon fines (very fine black powder) from the In-Line Activated Carbon Post Filter to be rinsed out. This is normal for the first tank of water or after when Inline filter is changed. OPERATION AND MAINTENANCE Tools Required Normal Operation Reverse Osmosis systems produce drinking water at relatively slow rates. Normal operation is to let the Reverse Osmosis Holding Tank fill with water and then draw water as is needed. When the pressure in the Reverse Osmosis Holding Tank falls to a given pressure (as the water is being used) the Automatic Shut-Off Valve (ASO Valve) will start water production and the Reverse Osmosis system will refill the Reverse Osmosis Holding Tank. When the Reverse Osmosis Holding Tank is full and no water is being used, the ASO Valve will automatically shut off the feed water to conserve water. The more water that is used (up to the capacity of the system) the better the Reverse Osmosis system will function. After periods of non-use, such as a week of vacation, it is better to empty the Reverse Osmosis Holding Tank and allow the Reverse Osmosis system to produce fresh water for use. 1. Basin Wrench or 10” Pipe Wrench 2. Low range air pressure gauge 3. Air Pump 5. Liquid Chlorine Bleach 6. Extra Plastic Tubing 7. Pan or Bucket

RkJQdWJsaXNoZXIy NTc4ODc=