9 FILTER INSTALLATION AND USER GUIDE BARRIE ● ONTARIO ● CANADA 705.733.8900 WWW.EXCALIBURWATER.COM SERVICE INSTRUCTIONS Media Replacement Step 1: - Shut the inlet water supply off by turning valve clockwise. Step 2: - Open the faucet downstream of the filter to release the pressure and then shut off the faucet. Step 3: - Turn the bypass valve handles towards the center to bypass operation. Step 4: - Loosen the bypass valve – tank connections and keep the bypass valve installed on plumbing. Step 5: - Hold the tank and rotate the in-out head counterclockwise to remove the tank head from the tank. Step 6: - If supply water is needed in house, the main water supply valve can be turned on. Step 7: - Pour the tank water into the drain and use some type of screen to prevent the media particles going to the drain. Step 8: - Rinse the tank with water. Step 9: - Place the distributor in the bottom center rim and plug the distributor tube opening with rag or tape. Step 10: - Use a funnel or other device to pour the appropriate quantity of media into the tank. Step 11: - Fasten the tank head after inserting the distributor tube into the in-out head. Step 12: - Fasten the bypass valve connections. Step 13: - Follow the start-up instructions given in this manual.
RkJQdWJsaXNoZXIy NTc4ODc=