2 FILTER INSTALLATION AND USER GUIDE BARRIE ● ONTARIO ● CANADA 705.733.8900 WWW.EXCALIBURWATER.COM INTRODUCTION The Pre-Treatment Chemical Removal system removes the Chlorine and other volatile chemicals. This manual must be read prior to installation and service of Pre-Treatment Chemical Removal Filter. INSTALLATION Water Test Results General Installation and Service Warnings • The filter is designed so that it can be installed easily with minor plumbing changes at point of entry on previous plumbing. • The piping must be clamped properly and the weight of the plumbing must not be on the filter. • Do not use any kind of lubricant including silicone. A silicone based lubricant can be only used on black O-Rings but not necessary. • Do not use pipe dope or other sealant on plastic nuts. • The nuts can be fastened and unfastened by hand or the plastic service wrench. Do not use pipe wrench to tighten the caps and nuts. • Do not block access to main shut off, water meter and other equipment. Site Requirements • Water Pressure: - 30-100 psi • Water Temperature: - 40-110°F (4.4-43°C) • The tank should be installed on firm level surface Parameter Water Sample Results Hardness Iron pH Chlorine Manganese Sulphur Yes / No Phosphates Total Dissolved Solids
RkJQdWJsaXNoZXIy NTc4ODc=