10 FILTER INSTALLATION AND USER GUIDE BARRIE ● ONTARIO ● CANADA 705.733.8900 WWW.EXCALIBURWATER.COM Setting Time of Day User Displays When the system is operating, one of displays given below may be shown. Pressing ▲ or ▼ will alternate between the displays shown below. User 1 This user display shows the time of the day. User 2 Displays the days until the next regeneration. “REGEN” arrow is displayed when the regeneration is supposed to occur at a scheduled time of day. Step #1: - Push “SET” button and hold for 3 seconds. Step #2: - When hour flashes press ▲ or ▼ until the correct hour is displayed. Then press “SET” to proceed to next step. Step #3: - The minutes will flash. Press ▲ or ▼ until the correct minute is displayed. Press “SET” to return to the User Displays. Time of day should only need to be set after power outages lasting more than 8 hours, if the battery has been depleted and a power outage occurs, or when daylight saving time begins or ends. Note: - Timekeeping is 12 hour with 60Hz frequency and 24 hour with 50Hz Return to User Display 1
RkJQdWJsaXNoZXIy NTc4ODc=