12 SOFTENER INSTALLATION AND USER GUIDE BARRIE • ONTARIO • CANADA 705.733.8900 WWW.EXCALIBURWATER.COM 3) MODEL VARIABLE COMPONENTS AND SPECIFICATIONS 3.1) Flow Controls and Injectors Model Number Mineral Tank Brine Tank Injector Drain Flow Control Dia X Height (Inch) (Inch) Color Order # Flow GPM Order # EWS SB27BF 9x48 18x33 (Dia x Height) Red CLK V30101D 2.2 CLK V3162022 EWS SB34BF 9x48 Red CLK V30101D 2.2 CLK V3162022 EWS SB44BF 10x54 White CLK V30101E 2.7 CLK V3162027 EWS SB54BF 10x54 White CLK V30101E 2.7 CLK V3162027 EWS SB64BF 12x52 Blue CLK V30101F 3.2 CLK V3162032 3.2) Specifications *Excalibur Softeners are factory programmed to 10lbs/ft3 default settings Model Number Mineral Tank Resin Quantity Grains Capacity Lbs Salt Setting Flow (GPM) Shipping Weight Dia X Height ft 3 6lbs Salt/ft3 10lbs Salt/ft3 15lbs Salt/ft3 Continuous Peak LBS EWS SB27BF 9X48 0.90 18,000 5.5 24,000 9.0 27,000 13.5 4.5 7.2 77 EWS SB34BF 9X48 1.13 23,000 7.0 31,000 12.0 34,000 17.0 5.7 9.0 91 EWS SB44BF 10X54 1.47 29,000 9.0 40,000 15.0 44,000 22.0 7.4 11.8 113 EWS SB54BF 10X54 1.80 36,000 11.0 49,000 18.0 54,000 27.0 9.0 14.4 130 EWS SB64BF 12X52 2.13 43,000 13.0 58,000 22.0 64,000 32.0 10.7 17.0 178 Step 8S – Select “dn” for downflow brine cycle using ▲ or ▼. Press NEXT to go to Step 9S. Press REGEN to return to previous step. Step 9S – Set “NORMAL” for the regeneration time. Press NEXT to exit Softener System Setup or Press REGEN to return to previous step. EXIT SOFTENER SYSTEM SETUP
RkJQdWJsaXNoZXIy NTc4ODc=