15 SOFTENER INSTALLATION AND USER GUIDE BARRIE • ONTARIO • CANADA 705.733.8900 WWW.EXCALIBURWATER.COM EXIT SOFTENER SYSTEM SETUP Step 8S: - Select “4 min” for the rinse cycle. Press NEXT to proceed to step 9S or press REGEN to return to previous step. Step 9S: - Select the salt dosage as per the performance data given. Step 10S: - Set System Grains Capacity. Refer the performance table given. Step 11S: - Set “AUto” for automatic volume capacity and reserve capacity calculations. Step 12S: - Set “NORMAL” regeneration time so that regeneration should occur only at preset time. Step 13S: - Set relay operation “oFF”. Press NEXT to exit softener system setup or press REGEN to return to previous step.
RkJQdWJsaXNoZXIy NTc4ODc=