11 REVERSE OSMOSIS INSTALLATION AND USER GUIDE BARRIE ● ONTARIO ● CANADA 705.733.8900 WWW.EXCALIBURWATER.COM Drain Clamp Assembly Choose the Reverse Osmosis drain outlet location. The following are instructions for discharging in the sink drain pipe. • Position the Drain Clamp on the sink drain pipe above the drain trap. Allow room for drilling. Tighten securely. • Use a battery powered or properly grounded drill. Using the Clamp port as a drill guide, drill a 7/32" hole through the wall of the drain pipe. • Locate the 3/8" Drain Tubing connected to the Reverse Osmosis System. Route to the Reverse Osmosis tubing to the Drain Clamp and trim to length. • Insert the tubing into the Drain Clamp. CAUTION: The lowest point of the line should be the point of connection to the Reverse Osmosis Drain Clamp. There should be no sag in the Reverse Osmosis tubing as this may cause excessive noise as the reject water is flowing to drain.
RkJQdWJsaXNoZXIy NTc4ODc=