3 REVERSE OSMOSIS INSTALLATION AND USER GUIDE BARRIE ● ONTARIO ● CANADA 705.733.8900 WWW.EXCALIBURWATER.COM REVERSE OSMOSIS COMPONENTS Automatic Reverse Osmosis Shut Off The Reverse Osmosis pressure switch senses when the product water tank is full and closes the feed water supply to prevent excess Reverse Osmosis reject water going to drain when the Reverse Osmosis System is not producing water. Booster Pump The Reverse Osmosis in line booster pump will increase the incoming water pressure after pre-turbidity and carbon filtration stages to 100psi for maximum efficiency and production quality through the Reverse Osmosis TFC membrane TDS removal process. Power standard outlet plug 110V / 60Hz is required. Faucet The reverse osmosis faucet is a designer lead free brushed nickel high flow 3/8” design goose neck with ceramic disc valve. Holding Tank The reverse osmosis holding tank is 3.2-gallon plastic designed for the storage and repressurization of reverse osmosis pure drinking water with valve. Drain Restrictor The restrictor is vital for proper operation of the RO membrane cartridge as it keeps water flowing through the membrane at the proper rate ensuring the water produced is the best quality. It is recommended the restrictor assembly be periodically inspected to be sure it is clean and unrestricted. WATER REQUIREMENTS Water Supply Source Municipal / Well Water System Pressure 30 to 100 psi Temperature 4o to 38o C (40o to 100o F) pH 3.0 to 11.0 Maximum TDS 1800 mg/L Turbidity < 1.0 net turbidity (NTU)
RkJQdWJsaXNoZXIy NTc4ODc=