4 REVERSE OSMOSIS INSTALLATION AND USER GUIDE BARRIE ● ONTARIO ● CANADA 705.733.8900 WWW.EXCALIBURWATER.COM Chemistry Requirements Hardness (CaCo3) < 170 mg/L (<10 gpg) Iron (Fe) < 0.1 mg/L Manganese (Mn) < 0.05 mg/L Hydrogen Sulfide (H2S) 0.00 mg/L INSTALLATION Tools Required Site Selection for Major Components The Reverse Osmosis System was designed to fit under a sink, however, because of space limitations or other reasons, the Reverse Osmosis system's flexible design allows for other locations. When determining the location of your Reverse Osmosis system remember that access to a cold water tap line, the household drain, and ease of Reverse Osmosis filter replacement are important considerations. All Reverse Osmosis components and tubing should be located in an area not exposed to freezing temperatures. If winter temperatures are severe, the area should be above the minimum temperature for proper performance. Do not expose Reverse Osmosis system or tubing to direct sunlight. 1. Tape Measure 2. Phillips and Flat Head screwdrivers 3. Adjustable Wrench 4. Variable Speed Drill Driver 5. Center Punch and hammer 6. 7/32”, 1/8” & 1/2” Drill Bits 7. Utility Knife 8. Tubing Cutter 9. Teflon Tape 10. Safety Glasses 11. Paper Towels 12. Extra Plastic Tubing 13. Basin Wrench or 10” Pipe Wrench 14. Low range air pressure gauge 15. Liquid Chlorine Bleach 16. Pencil 17. Masking Tape
RkJQdWJsaXNoZXIy NTc4ODc=