9 SOFTENER INSTALLATION AND USER GUIDE BARRIE • ONTARIO • CANADA 705.733.8900 WWW.EXCALIBURWATER.COM 2.3) Setting Time of Day 2.4) User Displays When the system is operating, one of below given displays may be shown. Pressing NEXT will alternate between the displays shown below. User 1 This user display shows the volume capacity remaining. User 2 Displays current time of the day. − “SOFTENING” displays when the meter is registering the water. − “REGEN TODAY” displays when the scheduled regeneration is to occur at a scheduled time of day. Push SET CLOCK button. When hour flashes press ▲ or ▼ until the correct hour is displayed. Then press NEXT. The minutes will flash. Press ▲ or ▼ until the correct minute is displayed. Press NEXT to return to the User Displays. Time of day should only need to be set after power outages lasting more than 8 hours, if the battery has been depleted and a power outage occurs, or when daylight saving time begins or ends. Return to User Display 1
RkJQdWJsaXNoZXIy NTc4ODc=