8 SOFTENER INSTALLATION AND USER GUIDE BARRIE • ONTARIO • CANADA 705.733.8900 WWW.EXCALIBURWATER.COM 2) CONTROL VALVE PROGRAMMING 2.1) Regeneration Screens 2.2) Button Operation Regen Screen • Displays the time remaining in the current cycle. • Displays the cycle name and sequence number. • Pressing REGEN advances to the next cycle. Scrolls to the next display. • Pressing once and releasing will schedule a regeneration at the preset delayed regeneration time. • Pressing again and releasing will cancel the delayed regeneration. • Pressing and holding for 3 seconds will initiate an immediate regeneration • Pressing while in regeneration will advance to the next cycle. • Pressing in the program levels will go backwards to the previous screen Change Variable being displayed. Holding for 3 seconds initiates a control reset. The software version is displayed and the piston returns to the home/service position, resynchronizing the valve. • Sets time of day • Save changes and Exit to user display from any programming screen Regeneration occurs automatically if volume capacity drops below the reserve capacity automatically predicted by Control Valve or the has control valve reached 14 number of days since last regeneration.
RkJQdWJsaXNoZXIy NTc4ODc=