8 FILTER INSTALLATION AND USER GUIDE BARRIE • ONTARIO • CANADA 705.733.8900 WWW.EXCALIBURWATER.COM 2) CONTROL VALVE PROGRAMMING Button Operation Regeneration Screens Setting Time of Day Scrolls to the next display. • Pressing once and releasing will schedule a regeneration at the preset delayed regeneration time. • Pressing again and releasing will cancel the regeneration. • Pressing and holding for 3 seconds will initiate an immediate regeneration • Pressing while in regeneration will advance to the next cycle. • Pressing in the program levels will go backwards to the previous screen Change Variable being displayed. Holding for 3 seconds initiates a control reset. The software version is displayed and the piston returns to the home/service position, resynchronizing the valve. Push NEXT until time of day screen is displayed. Press and hold ▼ until SET TIME is displayed and the hour flashes once. Press ▲ or ▼ until the correct hour is displayed. Then press NEXT. The minutes will flash. Press ▲ or ▼ until the correct minute is displayed. Press NEXT to return to the User Displays. Time of day should only need to be set if power outages lasting more than 8 hours, the battery has been depleted or when daylight saving time begins or ends. Regen Screen Displays the time remaining in the current cycle. Pressing REGEN advances to the next cycle.
RkJQdWJsaXNoZXIy NTc4ODc=