H Teflon® Tape Tank Valve STEP FOUR – INSTALLWATER STORAGE TANK 1 On the nipple on top of the tank, apply 2-3 wraps of Teflon® tape. 2 Hand-tighten the tank valve onto the tank nipple 3-4 times. Note: do not cross thread or over-tighten. 3 Using mount stand, place tank next to system assembly. STEP FIVE – INSTALL RO FAUCET You will need a sink top hole 1/2” in diameter. Note: Drilling holes into solid surfaces or surfaces made of stone should only be performed by a qualified and certified installer. 1 Ensure faucet body will mount flat against surface. 2 Place faucet base assembly on countertop and mark. 3 Drill ½” hole through countertop. 4 Fasten faucet to countertop. 5 Apply 2-3 wraps of Teflon® Tape to faucet. 6 Thread on faucet adaptor. 5 Reverse Osmosis Membrane 1/4”White Tube to Reverse Osmosis Angle Valve Adapter 3/8”White Tube to Faucet 3/8”White Tube to Tank Sediment Cartridge S Carbon Cartridge C RO Carbon Cartridge C 1/4”White Tube to Drain Restrictor v s smo i Membr Faucet Adapter
RkJQdWJsaXNoZXIy NTc4ODc=