11 RO Cartridge Installation 4.1 Press top button "Open”, take the lid down and put aside. 4.2 Take out the cartridges from carton, remove the outer plastic packing. 4.3 Install cartridges according to the instructions on the top cover. 4.4 After installation, put the lid back on machine. Installation Place: Place the machine on a flat and stable surface. Installation of Water Inlet & Outlet 6.1 Installation of inlet water T valve :Clean the installation area,close the inlet water valve,take apart the faucet or angle valve,then connect the inlet water T valve,finally connect to the original faucet or angle valve. (Attention:Connection of screw thread should be sealed with tape or 0 ring to avoid leakage) 6.2 Connection of inlet water port :connect one side of PE pipe to the inlet water valve,and another side to the inlet water port on the machine. 6.3 Installation of faucet:According to the required place of faucet,drill a 29mm hole on the stainless steel sink,then fix the faucet.
RkJQdWJsaXNoZXIy NTc4ODc=