12 6.4 Connection of purified water port:Connect the 1 /4" fitting to one side of faucet,cut the 1/4" PE pipe to a suitable length,one side insert to the quick connector and the other side connect to the port of purified water on the machine. 6.5 Connection of drinking water port:Connect directly with the connecting rod of faucet,cut the 1 /4" PE pipe to a suitable length, one side insert to the quick connector and the other side connect to the port of drinking water on the machine. 6.6 Connection of drain water port:Take a suitable length of 3/8" PE pipe to connect with the port of drain water on the machine . And connect another side to the drain line and fix the PE pipe to avoid drop. 6.7 Flush the cartridge: Install all the cartridges before flushing. Flushing of PP+C cartridge: After all the installation, turn on the purified water tap to flush PP+C filter about 10-20 minutes until the water is clean, then turn off the purified water tap. Flushing of T33 cartridge: After all the installation, turn on the drinking water tap to flush about 10-20 minutes until the water is clean. Attention: 1. lf there is no water coming from the tap, please check the power supply. 2. Flush filter cartridges according to instruction 6. 7. before first usage General Instructions When using for the first time, please open the faucet and the inlet water valve. When water is running from tap, close the tap for 30 minutes and check for leakages. If there are no leaks, you can use the machine normally. In normal user mode, keep the power connected, open and close the faucet. When using the machine after a longer period of no usage, please open the faucet and flush cartridges according to the instructions.
RkJQdWJsaXNoZXIy NTc4ODc=